AFTERCOOLER

After Cooler – Highlights

Air-cooled compressed air after-coolers, available as electrically or pneumatically operated models, cool the compressed air with atmospheric air.

The compressed air is cooled to approximately 90 C above the ambeint temperature. This causes the oil and water vapour to condense which is then removed by the seperator. Water cooled after coolers are also available.

EURO VAC

HIGHLIGHTS

For recovery of light and dry abrasives at short distances and for a recovery rate of 1 – 2 mtons per hour the Euro – vac is an ideal machine. The machine is operated on compressed air. The machine is fitted with a tungsten carbide lined nozzle for abrasion resistant.

DUST FREE BLAST MACHINES

Vacuum Blasting Machine

The strong and versatile vacuum blasting machines are designed based on the principle of suction, recovery and recycling principle.

The tungsten carbide lined blast nozzles with an attachment of brush seals the surface during blasting and the spent grit is recovered recycled and dust is extracted to a dust chamber. Various types of brushes (round, angle, flat etc) are used depending on the area to be blasted.

This complies with contemporary environmental regulations and offers a dust free working environment. Vacuum blasting results in substantial savings on grit and waste disposal. The vacuum blasting machine due to its air drives nature, is suitable for explosion risk area such as power station and gas field. The machine is supplied with a dust collector to contain dust.

As a general guideline, 4-6m2/hr on steel surface to SA2 + and 10-12 m2/hr on concrete surface can be blast cleaned.

AIR VENTILATION SYSTEMS

Highlights

Air conductors provide high volumes of air for cooling and ventilating applications. Having no moving parts, operates on compressed air or steam, they are ideally suited for use in hazardous areas.

Rugged, reliable and efficient, blowers are designed to operate on compressed air, steam or water. The high volume of these blowers makes it easy to handle gas, ventilating, drying applications.

HOGGAJET

Vacuum Recovery System

Vacuum Systems for the effective recovery or clearing of particulate materials

The AGMEC HoggaJet and JetPump- compact air operated vacuum systems. Tried and tested over many years in the most arduoud situations and found to be efficient, cost effective alternatives for the recovery or removal of particulate materials

This pneumatically operated system is probably the simplest and toughest vacuum recovery system currently available. Incorporating the JetPump as the prime mover, it can produce above 14“ Hg of Vacuum when connected to an air supply of 250 cfm at 80 psi. At these levels 5-6 ton per hour recovery rates can be attained.

With just two units, a hopper/cyclone and a filter box, the Hoggajet is flexible and extremely robust system that‘s easy to use, with the performance of larger, more expensive machines. The system will in fact recover solids up to 50mm (2“) in diameter over distances in excess of 100 meters, dependent upon particle size, type of material volume and pressure of air supply.

Maintenance and operator attention is reduced to a minimum, as the HoggaJet has only one moving part. With no electrical power required, there‘s no risk of fire or explosion, particularly important in inflammable areas.

The system conforms to all Health and Safety at Work Acts, particularly in respect of the noise levels-83 db at meters

Method of Operation

All material is recovered through the gulper suction head and drawn via the rubber lined hose into the cyclone. The vortex created separates the very fine dusts from the heavier particles which fall, under gravity, into the hopper. A dump valve on the hopper is operated by an adjustable timer which can be set to suit the recovery.

Any remaining dust travels along the flexible intermediate hose to the filter box. Inside the box the 18 filter socks collect the dust as the air stream passes through. Clean air discharged through the JetPump and silencer to atmosphere. The filter socks are automatically cleaned each time the machine stops by reverse pulsing into the dust compartment situated at the bottom of the filter box

DEHUMIDIFIER

EUROBLAST DH 1,000 M3/h – EUROBLAST DH 18,000 m3/h Dehumidifier

Euroblast dehumidifier Machines provide humidity control especially in blast and paint applications and allow to paint and sandblast at suitable humidity. Our dehumidifier machines produced using silica-gel rotors minimize the drying time by providing heat and humidity balance and prepare corrosion prevention environment.

• Models from 1,000 m³/h to 18,000 m³/ h.
• The pre-cool and after-cool versions are optional.
• Strong design with steel case and screws.
• The ability to easily remove and install spare parts.
• Large air inlet grille and filters.
• Adjustable dehumidification capacity and air outlet heat adjustment.
• Usability in interior and exterior areas
• Dry air pressure up to 1200 pascal.

Dehumidifier is mainly used in the following industries and sectors:

• Shipbuilding Industry
• Foundries
• Tank Manufacturing
• Petro Chemistry
• food
• Textile