flag EN flag RU

DEHUMIDIFIER

EUROBLAST DH 1,000 M3/h – EUROBLAST DH 18,000 m3/h Dehumidifier


Euroblast dehumidifier Machines provide humidity control especially in blast and paint applications and allow to paint and sandblast at suitable humidity. Our dehumidifier machines produced using silica-gel rotors minimize the drying time by providing heat and humidity balance and prepare corrosion prevention environment.


    • Models from 1,000 m³/h to 18,000 m³/ h.
    • The pre-cool and after-cool versions are optional.
    • Strong design with steel case and screws.
    • The ability to easily remove and install spare parts.
    • Large air inlet grille and filters.
    • Adjustable dehumidification capacity and air outlet heat adjustment.
    • Usability in interior and exterior areas
    • Dry air pressure up to 1200 pascal.



Dehumidifier is mainly used in the following industries and sectors:


    • Shipbuilding Industry
    • Foundries
    • Tank Manufacturing
    • Petro Chemistry
    • food
    • Textile

Euroblast – Dehumidifier Supplier in UAE – Technicial Specifications

  • EUROBLAST Dehumidification Machines vary from 1,000m3 / h to 18,000m3 / h. Depending on the application of Moisture Acceptors Relative Humidity (RH) in Indoor environment can be reduced to levels of 10-15% from 90% levels.
EGM SERIES DH 3000 DH 5000 DH 8000 DH 10000
Water removal Cap 14.4 kg/h 32.0kg/h 52.4 kg/h 62.0kg/h
Process air volume 3,000 m³/h 5,000 m³/h 8,000 m³/h 10,000 m³/h
Reg. Air heater cap. 30 kW 45 kW 60 kW 70 kW
Reg. Air fan motor 2.2 kW 3 kW 4.0 kW 5 kW
Process air motor 3.0 kW 4.0 kW 5.5 kW 8.0 kW
Rotor motor 0.09 kW 0.09 kW 0.09 0.09 kW 0.09 kW 0.09 kW 0.09 kW
Max. Electrical Cap. 36 kW 53 kW 70 kW 84 kW
Height 1,100 mm 1,450 mm 1,200 mm 1,270 mm
Width 900 mm 1,100 mm 1,180 mm 1,300 mm
Length 2,100 mm 2,300 mm 2,750 mm 2,950 mm
Weight 580 kg 850 kg 980 kg 1,150 kg
Air Inlet 150 mm 200 mm 265 mm 300 mm
Dry Air Outlet 165 mm 217 mm 275 mm 310 mm
Air Pressure (up to) 1100 Pa 1100 Pa 1100 Pa